15CA
15CA

CALL TO ORDER

  The 15CA is a 15' pull cable meant for use the manually activated bottles within the activation head.
$48.51 Read More
5CA
5CA

CALL TO ORDER

  The 5CA is a 5' pull cable meant for use the manually activated bottles within the activation head.
$33.16 Read More
AH
AH

CALL TO ORDER

  The AH is the activation head that is used for all manually activated bottles.
$50.50 Read More
AMRC-1000
AMRC-1000

CALL TO ORDER

  The AMRC-1000 is a 10# automatic manual pull system. The bottle is made of aluminum, the dimensions are 18.95″ X 5.25″, and weighs 17lbs. Each AMRC has one line that would be automatically set off at 175 degrees and then 3 Manually operated nozzles. This bottle is SFI’d. If the automatic nozzle is deployed it does not activate the manual nozzles, and if the manual nozzles it deployed then the automatic nozzle is not activated by it. The uses for the temperature are as follows (ALL SYSTEMS COME WITH 175 DEGREES UNLESS SPECIFIED OTHERWISE): - 155 degree, it would be used for something indoors that would not typically get subjected to the heat of the summers. - 175 degree, usually used for over the fuel cell, this is the system that NASCAR uses for protection over their fuel cell. - 200 degree, typically used for well ventilated engines, such as motorcycles. Currently sold for drag bikes mostly. - 286 degree, used for engine bays, or area that are subjected to high heat. The system comes with the following: 1 – Filled 10# Automatic-Manual System 1 – Activating Head 1 – Pull Cable 1 – Discharge Adapter 3 – Nozzle Adapters 3 – Nozzles 2 – Tubing Tees 1 – Discharge Tubing Roll 1 – Aluminum Mounting Bracket Plate 2 – Stainless Steel Mounting Brackets
$819.32 Read More
AMRC-1002
AMRC-1002

CALL TO ORDER

  The AMRC-1002 is a 10# automatic manual pull system specifically designed for the needs of the Lucas Oil Dirt Late Model Series. The bottle is made of aluminum, the dimensions are 18.95″ X 5.25″, and weighs 18lbs. Each AMRC has two line that would be automatically set off, one at 24" and the other at 84". Also has 3 Manually operated nozzles, one suggested for the cockpit and the others in the engine compartment. This bottle is SFI’d. System comes with 1.5" roll bar mounting brackets, 5' pull cable, and one 8' of aluminum tubing for the manually operated nozzles.   The system comes with the following: 1 – Filled 10# Dual Automatic-Manual System 1 – Activating Head 1 – Pull Cable 1 – Discharge Adapter 3 – Nozzle Adapters 3 – Nozzles 2 – Tubing Tees 1 – Discharge Tubing Roll 1 – 1-1/2" Roll Bar Mounts   AMRC-1002 Instruction Manual   Installation Pictures
$919.32 Read More
AMRC-500
AMRC-500

CALL TO ORDER

  The AMRC-500 is a 5# Automatic manual pull system. The bottle is made of aluminum, the dimensions are 17.20″ X 4″, and weighs 10lbs. Each AMRC has one line that would be automatically set off at 175 degrees and then 2 Manually operated nozzles. This bottle is SFI’d. If the automatic nozzle is deployed it does not activate the manual nozzles, and if the manual nozzles it deployed then the automatic nozzle is not activated by it. The uses for the temperature are as follows (ALL SYSTEMS COME WITH 175 DEGREES UNLESS SPECIFIED OTHERWISE): - 155 degree, it would be used for something indoors that would not typically get subjected to the heat of the summers. - 175 degree, usually used for over the fuel cell, this is the system that NASCAR uses for protection over their fuel cell. - 200 degree, typically used for well ventilated engines, such as motorcycles. Currently sold for drag bikes mostly. - 286 degree, used for engine bays, or area that are subjected to high heat. The system comes with the following: 1 – Filled 5# Automatic-Manual System 1 – Activating Head 1 – Pull Cable 1 – Discharge Adapter 2 – Nozzle Adapters 2 – Nozzles 1 – Tubing Tees 1 – Discharge Tubing Roll 1 – Aluminum Mounting Bracket Plate 2 – Stainless Steel Mounting Brackets
$593.49 Read More
AMSC-500
AMSC-500

CALL TO ORDER

The AMRC-500 is a 5# Automatic manual pull system. The bottle is made of aluminum, the dimensions are 17.20″ X 4″, and weighs 10lbs. Each AMRC has one thermal nozzle that would be automatically set off at 200 degrees and then 2 Manually operated nozzles. This bottle is compliant with SFI 17.3. If the automatic nozzle is deployed it does not activate the manual nozzles, and if the manual nozzles it deployed then the automatic nozzle is not activated by it. The system comes with the following: 1 – Filled 5# Automatic-Manual System 1 – Activating Head 1 – Pull Cable 1 – Discharge Adapter 2 – Nozzle Adapters 2 – Nozzles 1 – Tubing Tees 1 – Discharge Tubing Roll 2 – Roll Bar Mounting Clamps  
$648.49 Read More
AMSC-500H
AMSC-500H

CALL TO ORDER

The AMSC-500H is a 5# Automatic manual pull system. The bottle is made of aluminum, the dimensions are 17.20″ X 4″, and weighs 10lbs. Each AMRC has one 24" line with a thermal nozzle that would be automatically set off at 200 degrees and then 2 Manually operated nozzles. This bottle is compliant with SFI 17.3. If the automatic nozzle is deployed it does not activate the manual nozzles, and if the manual nozzles it deployed then the automatic nozzle is not activated by it. The system comes with the following: 1 – Filled 5# Automatic-Manual System 1 – Activating Head 1 – Pull Cable 1 – Discharge Adapter 2 – Nozzle Adapters 2 – Nozzles 1 – Tubing Tees 1 – Discharge Tubing Roll 2 – Roll Bar Mounting Clamps  
$648.49 Read More
CLAMP
CLAMP

CALL TO ORDER

  The CLAMPS ONLY are hose clamp style used with the mounting bracket plate. (SPECIFY BOTTLE SIZE WITH ORDER)
$5.81 Read More
DA
DA

CALL TO ORDER

  The DA is the discharge adapter that connects the aluminum tubing to the activation head. It is a 1/4" OD compression x 1/4" Male NPT.
$5.17 Read More
DT
DT

CALL TO ORDER

  The DT is an 8' roll of aluminum discharge tubing, this tubing is sent standardly with all manually activated systems.
$10.35 Read More
DTS
DTS

CALL TO ORDER

  The DTS is a 10' roll of steel discharge tubing, this tubing is most commonly used with NASCAR.
$24.69 Read More